A. Single component, Neutral curing, excellent fluidity, excellent extrudability under temperatures between 4℃ and 40℃;
B. Predominant weatherproof performance, resistance against aging, ultraviolet, and Ozone;
C. No stain to glass, metal, gypsum board, marble, various plastics and etc., excellent adhesion;
D. Predominant resistance against high and low temperature, no crisping, hardening, or disintegrating at a low temperature of -50℃, no softening and no degradation at a high temperature of 180℃, excellent elasticity can be kept all the time.
A. Insulating seal of electric switch
B. Encapsulating of such electronic components as a relay, circuit board and etc.
C. For sealing purposes of moisture-proof, anti-creep, coating and etc.
Packed in a plastic barrel with a net capacity of 300ml
Soft metal package with a net capacity of 100ml
Typical Technical Data
||White, Black, and the colors required by users
|Surface drying time(min)
|Adhesive strength for tension (MPa)
|Breakdown Voltage KV/mm
||Storage period of six months at shady, cool and dry places between the temperature of 20 ℃ below zero and 27℃
◆ Provide complete technical data of products;
◆ Debug products formulation as required by users meet requirements of users to certain special performances of products;
◆ Provide adhesive test for customers, appraise the adhesive performance of rubber products for industry of the company and material selected by users, and offer the contents such as in test results, recommended surface washing method of products and whether priming or not in writing to customers;
◆ Welcome users to cooperate and communicate with our engineers to discuss and find out resolving plans together.
This product is non-toxic after it is fully cured, but should avoid eye contact and keep away from reach of children before curing; keep the ventilation in the working environment.
Note to users: The information published in this article is all that we believe to be reliable. Due to the wide variety of situations, we cannot understand all the situations, so we cannot guarantee the correctness and applicability of our products in certain usages and uses. Users should understand the product in detail before using the product, and then decide the best way to use it.