Send Message

SS626 208L Silicone Structural Sealant For Glazing Bonding ASTM C1184

Basic Information
Place of Origin: China
Brand Name: BAI YUN
Certification: ASTM C1184
Model Number: SS626
Minimum Order Quantity: 10 kits
Price: To be informed
Packaging Details: drums
Delivery Time: 10 days
Payment Terms: L/C, T/T
Supply Ability: 10000kits
Detail Information
Volume: 189L+19L Colour: White+Black
High Light:

208L Silicone Structural Sealant


Glazing Bonding Silicone Structural Sealant

Product Description

BAI YUN® SS626 Silicone Structural Sealant for structural glazing bonding

BAI YUN® SS626 Silicone Structural Sealant




  • High level of mechanic properties: High strength
  • Non-corrosive curing system
  • No unpleasant odor during curing.
  • Excellent weather ability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes
  • Remains flexible over a temperature range of -58°F(-50°C) to 302°F (150°C)
  • Successfully tested for using in protective glazing applications
  • Excellent unprimed adhesion to wide range of substrates including coated, enameled and reflective glasses, anodized and polyester coated or painted aluminum profiles
  • Good compatibility with other neutral silicone sealants



  • Two-part, neutral-curing
  • RTV silicone sealant



  • As a secondary edge adhesive sealant in insulating glass units.
  • Structural attachment of many panel systems.
  • Protective glazing applications
  • Panel stiffener applications


Typical properties

Property Result Test method
Base-As Supplied
Color White  
Physical Form Paste  
Specific Gravity 1.46g/cm³ ASTM D1475
Catalyst-As Supplied
Color Black  
Physical Form Viscous Paste  
Specific Gravity 1.04 g/cm³ ASTM D1475
As catalyzed
Color Black  
Specific Gravity 1.43g/cm³ ASTM D1475
Tooling Time(23°C/73°F, 50% RH) 10-20minutes  
Snap time(23°C/73°F, 50% RH) 20-70mim  
Flow, Sag or Slump <0.1mm ASTM C639
Mix Ratio(By volume) A:B = 9-11:1  
Recommend Mix Ratio(By volume) A:B=10:1  
VOC Content <40g/L  
As cured - After 21 days at 23°C (73°F) and 50% RH
Durometer Hardness, Shore A 45 ASTM C661
Ultimate Tensile Strength 0.70MPa ASTM C 1135
Ultimate Elongation 100% ASTM C 1135
Tear Strength ,Die B 8 kN/m ASTM D624
Specifications: Typical property data values should not be used as specifications. Assistance with specifications are available by contacting Guangzhou Baiyun Technology CO.,LTD.






·ASTM C1184

·GB 16776




Part A(Base):: White; Part B(Catalyst): Black; After Mixed: Black.



Part A(Base): 189 L drum

Part B(Catalyst): 19 L pail


Storage and shelf life:

For Part A(Base):18 months from the date of manufacture when stored at or below 27ºC (80ºF)in the original unopened containers.

For Part B(Catalyst):12 months from the date of manufacture when stored at or below 27ºC (80ºF)in the original unopened containers.


Product limitation:

This product should not be applied:

  • In structural glazing applications, unless Guangzhou Baiyun Technology CO.,LTD. has reviewed shop drawings for applicability and has performed adhesion and compatibility tests on project substrates, spacer materials and all accompanying accessories. Review and testing is done on a project-by-project basis. No blanket approval is given by Guangzhou Baiyun Technology CO.,LTD. for structural glazing applications. Structural glazing industry guidelines (ASTM C1401) suggest that drawings and details are to be reviewed by all parties involved in the manufacture of an SSG system and for each building project.
  • To building materials that bleed oils, plasticizers or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes
  • When surface temperatures below 10ºC (50ºF) or exceed 40ºC (104ºF)
  • Where painting of the sealant is required, as the paint film may crack and peel
  • In below-grade applications
  • For use as an interior penetration fire stop sealing system
  • In horizontal floor joints where abrasion and physical abuse are likely to be encountered
  • To frost-laden or damp surfaces
  • For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)
  • For contact with strong acids or bases
  • To surfaces in contact with food
  • For continuous immersion in water
  • For water immersion applications.

Do not apply acid-curing (Acetoxy) silicone sealants to this product as this may cause loss of adhesion of SS626 Two Parts Silicone Structural Sealant to glass or other substrates used in the system.


Handling and safety

Product safety information required for safe use is not included in this document. before handling, read product and material safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available from baiyun sales application engineer, or distributor, or by calling baiyun customer service.


How to use

BAIYUN SS626 Two Parts Silicone Structural Sealant, when used in structural applications, must be reviewed by BAIYUN technical service specialists.

Complete design and installation guidelines are contained in the BAIYUN Technical Manual when using this product.





Health and environment information

For information and advice regarding transportation, handling, storage and disposal of chemical products, users should refer to the actual Material Safety Data Sheets containing physical, ecological toxicological and other safety-related data.



Contact Details
Jimmy Zheng

Phone Number : +86 15920132200

WhatsApp : +8615920132200