SKF323-AB Fast Curing RTV Two Component Potting Sealant For Solar Module

SKF323-AB High Performance Fast Curing RTV Two-component Potting Sealant For Solar Module

SKF323-AB Two-component Potting Sealant
1. Product Overviews
This product is a two-component condensation type silicone potting compound which cures at room temperature. It has the characteristics of fast curing speed, easy flow potting, yellowing resistance, water and moisture resistance, excellent insulation performance, and wide bonding substrate. The product is suitable for pouring and potting of large-area bonded seals such as photovoltaic junction boxes, integrated circuit boards, transformers, and waterproof power supplies.
 

 
 
2.FEATURES

• Superior settling resistance, easy to use, good fluidity, easy for potting operation.
• Superior mechanical properties, electrical properties, aging resistance and yellowing resistance.
• Suitable for bonding and sealing of various types of substrate components.
• Meet the requirements of EU ROHS environmental protection directive.

 
 
​3.TYPICAL PROPERTIES
 

Note: The mechanical and electrical properties in the table are measured under the conditions of 23 ± 2 ℃ and relative humidity of 50 ± 5%.
 
4. PACKAGING AND STORAGE
 

• This product is a two-component product. Packaging specifications: A component: 12KG / barrel, B component: 2KG / barrel.
• This product should be stored in a cool and dry place below 27 ℃, the storage period is 6 months from the date of production.

 
5. METHOD OF USE

• Preparation: Before mixing, first observe the state of component A. If there is sedimentation and layering, please stir evenly before use. Prepare samples for potting.
• Mixing: The products are mixed according to the ratio (weight) of A: B = 6: 1, stir well and degas by vacuuming.
• Encapsulation: Encapsulate the evenly mixed compound into the product to be encapsulated as soon as possible, and cure naturally at room temperature. After initial curing, it can enter the next process (after 30min). Do not transport components before curing.

 
6.TECHNICAL SERVICE
Provide complete product technical information.
Debug the product according to clients’ requirements to meet the special needs.
Provide compatibility & adhesion test for free, to help clients assess the bonding properties of our industrial sealant products with other materials.
Welcome users to cooperate with our engineers, communicate and discuss solutions together.
 
7. QUALITY ASSURANCE
The company has passed ISO9001/ISO14001/OHSAS18001 management system certification, and strictly produces and controls product quality according to ISO9001 quality system requirements.
 
8. ATTENTION
 

Check the Material Safety Data Sheet (MSDS) before using the product.
 

Sealant products are not toxic after fully cured, but should avoid contact with eyes before curing. If contact with eyes, rinse with plenty of water and consult a doctor. uncured products should be kept out of contact with children. The product will release small molecular substances during the curing process, and ventilation should be paid attention to in the construction and curing areas to prevent the concentration of small molecular substances from being too bad for people.

BAIYUN Company Introduction:
Guangzhou Baiyun Chemical Industry Co., Ltd. was found in 1985, is the first Silicone Sealant Manufacturer in China chemical industry. We're mainly engaged in production of silicone sealants for industrial purposes and constructions.
With 37years‘ passion in silicone sealant, At present, our advantages are mainly reflected in the following aspects:
 

• Strong R&D: 260+ patents, 50+ PhD technical team, CNAS Labs
• Employees: over 500 employees
• Rigid QA: 12 management Standards and 58 QA tests
• Product standards/certificates: TUV, ASTM, ISO, ETAG, GB, UL, ROSH Certificates