Isocyanate Hardener Power Battery Sealant,
Two Component Power Battery Sealant,
Two Component Polyurethane Potting Sealant
Two-component polyurethane potting sealant
|PU-8262-L Part A
|PU-8262-L Part B
|PU8262-L Part A
|PU-8262-L Part B
|Light Yellow Liquid
|Mixing Ratio(by weight)
|Viscosity after Mixing
|2±0.5(designable solution for the customer different request )
*The above data are all measured at an ambient temperature of 23°C.
*The above date is tested after curing for 7 days at 23℃, 50% R.H.
Take proper amount of part A and B in a weight ratio of 1:5, mix them evenly and use immediately. It is recommended to use vacuum stirring to mix sealant. It is best to bake the coated material to remove moisture on the surface before coating. The operating time depends on the quantity of the sealant(mixture of A/B) as well as the operating temperature. The larger the amount of sealant mixed, the shorter the operating time.
1. The product will begin to curing gradually after mixing, its viscosity will gradually increase, and some heat will be released.
2. The more amount of the sealant, the faster the curing speed, during the chemical reaction, a large amount of heat will probably be released.
Please pay attention to controlling the amount of sealant, too much amount will accelerate the reaction, so that the operating time will also be shortened, the mixed sealant should be used up immediately.
3. All components should be sealed and stored. The mixed sealant should be used up at one time to avoid waste.
4. The product is a non-dangerous product, but do not put it in your mouth or contact your eye.
5. A very small number of people will have mild skin allergies and mild itching when contact with the sealant for a long time. It is recommended to wear protective gloves when using them.
If it contacts your skin, please wipe it off with acetone or alcohol, and wash it off with detergent.
120kg/kit (20 kg for A component + 100 kg for B component)/or other packaging specifications according to customer needs.
Storage and Transportation:
Store in a cool and dry place, the shelf life is 6 months (under 25℃).
The company has passed ISO9001/ISO14001/ISO45001 management system certification, and strictly produces and controls product quality according to ISO9001 quality system requirements.
Check the Material Safety Data Sheet(MSDS) before using the product.
Sealant products are not toxic after fully cured, but should avoid contact with eyes before curing. If contact with eyes, rinse with plenty of water and consult a doctor. uncured products should be kept out of contact with children. The product will release small molecular substances during the curing process, and ventilation should be paid attention to in the construction and curing areas to prevent the concentration of small molecular substances from being too bad for people.
Attention: The data and information presented in this catalog may not be relied upon to represent standard values. We reserves the right to change such data and information. However, because conditions and methods of use of our products are beyond our control, so we cannot ensure the validity and applicability of some usage, before using the product, users should read the technical data carefully and then decide the best way to use sealant.
GUANGZHOU BAIYUN CHEMICAL INDUSTRY CO., LTD. SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
GUANGZHOU BAIYUN CHEMICAL INDUSTRY CO., LTD. DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.