|Volume:||300ml, 590ml||Color:||Black, White, Grey And Other Customized Color|
|Application:||Sealing Joints For External Wall Joints, Stone;marble,porus Materials||Shelf Life:||12 Months|
|Appearance:||Paste||Composition:||One-part, RTV Silicone Sealant, Neutral-curing|
|Key Words:||Silicone Sealant|
590ml Stone Silicone Sealant,
Marble Stone Silicone Sealant
BAIYUN Stone Silicone Sealant weather sealing for porus materials marble
BaiYun® SS602T Silicone Sealant
For travertine curtain wall joints and cannot pollute the travertine curtain wall
Odorless, non-corrosive cure system, especially for fiber cement board
Excellent weatherability and high resistance to ultraviolet radiation, heat and
humidity, ozone and temperature extremes
Remains flexible over a temperature range of -58°F(-50°C) to 302°F (150°C)
Good compatibility with other neutral silicone sealants
RTV silicone sealant
Weather-proof sealing in the travertine curtain wall joints
Sealing in expansion joints for travertine and glass,metal
Property Result Test method
Uncured-As Tested at 23°C (73°F) and 50% RH
Specific Gravity 1.34 ASTM D1875
Working time(23°C/73°F, 50% RH) 10-20minutes ASTM C679
Tack-free time(23°C/73°F, 50% RH) 30-60 minutes ASTM C679
Curing time(23°C/73°F, 50% RH) 7-14 days
Flow, Sag or Slump ＜0.1mm ASTM C639
VOC Content ＜38g/L
As Cured-After 21 days at 23°C (73°F) and 50% RH
Durometer Hardness, Shore A 25-40 ASTM D2240
Peel Strength 34lb/in ASTM C719
Joint Movement Capability ±20 ASTM C719
Staining and migration,travertine stone None ASTM C1248
Specifications: Typical property data values should not be used as
specifications. Assistance with specifications are available by contacting
Guangzhou Baiyun Chemical Industry CO., LTD.
BAIYUN SS602T Silicone Sealant is a one-component, non-corrosion, neutral curing
silicone sealant designed and tested for weather-proof sealing in fiber cement board
curtain wall joints. The material is supplied as a paste, which cures into a durable,
formed-in-place silicone rubber joint sealant upon exposure to atmospheric moisture.
BAIYUN SS602T Silicone Sealant meets or exceeds the requirements of the following
specifications when tested on a PC substrate for one-part sealants.
C920; Type S, Grade NS, Class 20, Use NT, A, G, M, O
HOW TO USE
Complete design and installation guidelines are contained in the BAIYUN Technical
Manual when using this product.
BAIYUN SS602T Silicone Sealant is available in 8 colors: black, gray, white, dark gray,
deep brown, rufous, bright yellow and khaki. Custom colors may be ordered to match
virtually any substrate.
BAIYUN SS602T Silicone Sealant is available in 10.1 fl. oz. (300 ml) plastic caulking
cartridges,16.9 fl. oz. (500 ml) foil sausage packs.
BAIYUN SS602T Silicone Sealant should not be used, applied or is not recommended:
In structural glazing applications or where the sealant is intended as an adhesive.
In areas where abrasion and physical abuse are encountered.
In totally confined spaces as the sealant requires atmospheric moisture for cure.
On frost-laden or damp surfaces
To building materials that bleed oils, plasticizers or solvents – materials such as
impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets
In below-grade applications
On substrates made of polypropylene, polyethylene, polycarbonate and
Where movement capability greater than ±20% is required.
Where painting of the sealant is required, as the paint film may crack and peel
For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill
aluminum, bare steel, etc.)
To surfaces in contact with food
For use underwater or in other applications where the product will be in continuous
contact with water
HANDLING AND SAFETY
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT
INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT
AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR
SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE
MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM BAIYUN SALES
APPLICATION ENGINEER, OR DISTRIBUTOR, OR BY CALLING BAIYUN
USABLE LIFE AND STORAGE
When stored at or below 27ºC (80ºF) in the original unopened containers, BAIYUN
SS602T Silicone Sealant has a usable life of 12 months from the date of manufacture.