| Place of Origin: | China |
|---|---|
| Brand Name: | BAIYUN |
| Certification: | ASTM C1184, ETAG002 |
| Model Number: | SS621E PV |
| Minimum Order Quantity: | 1200PCS |
| Price: | Negotiation |
| Packaging Details: | 300ml Cartridge package/590ml Sausage package |
| Delivery Time: | 7-14days |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 1000000PCS/month |
| Material: | 100% RTV Silicone | Type: | One Part Neutral Silicone Sealant |
|---|---|---|---|
| Package: | 300ml Cartridge/590ml Sausage | Standard: | ASTM C1184, ETAG002 |
| Application: | Bifacial Solar Module Structural Bonding | ||
| High Light: | Solar Module Structural Sealant,One Part Solar Module Structural Sealant |
||
One Part Bifacial Solar Module Structural Sealant structrual glazing of glass glass solar module pass European Standard
SS621E Silicone Structural Sealant
SS621E Silicone Structural Sealant is a one-component neutral-curing silicone sealant designed specifically for structural bonding applications of bi-facial glass glass PV modules and solar PV curtain wall engineering. SS621E meets global standards for structural glazing, with excellent structural adhesion properties and weather resistance.
| Property | Typical Value | Test Method | |
| Appearance(Color) | Black | Visual | |
| Tack-free Time(23°C/73°F,50% RH),min | 20~40 | ASTM C679 | |
| Full Adhesion,days | 14-21 | / | |
| Durometer Hardness,Shore A | 45±3 | ASTM D2240 | |
| Tensile Strength,MPa | ≥2.0 | ASTM D412 | |
| Elongation,% | ≥300 | ASTM D412 | |
|
Tensile Adhesion Properties |
Tensile Strength,MPa | ≥1.0 |
ASTM C1135
|
| Ultimate Elongation,% | ≥100 | ||
| Cohesive Failure(Al-Glass),% | ≤8 | ||
Note: Typical property data values should not be used as specifications.
• Cartridge: Net volume 300ml.
• Foil Sausage: Net volume 590ml.
PREPARATION:
Clean all joints and glazing pockets, removing all foreign matter and contaminants such as grease, oil, dust, water, frost, surface dirt, old sealants, or glazing compounds and protective coatings.
PROCESSING AND CURING:
Install back-up material or joint filler, setting blocks, spacer shims, and tapes. Mask areas adjacent to joints to ensure neat sealant lines. Primer is generally not required on non-porous surfaces, but may be necessary for optimal sealing of certain porous surfaces. A test placement is always recommended.
Apply SS621E Silicone Structural Sealant in a continuous operation using a positive pressure.(The sealant can be applied using many types of air-operated guns and most types of bulk dispensing equipment.)Before a skin forms(typically within 20 minutes), tool the sealant with light pressure to spread the sealant against the backing material and joint surfaces. Remove masking tape as soon as the bead is tooled.
SS621E Silicone Structural Sealant should not be applied:
◆ To building materials that bleed oils, plasticizers, or solvents– materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes
◆ In totally confined spaces as the sealant requires atmospheric moisture for cure
◆ When surface temperatures exceed 60°C(140°F)
◆ Where painting of the sealant is required, as the paint film may crack and peel
◆ To surfaces in contact with food- this sealant does not comply with Federal Food and Drug Administration food-additive regulations
◆ In below-grade applications
◆ For use as an interior penetration fire stop sealing system
◆ In horizontal floor joints where abrasion and physical abuse are likely to be encountered
◆ To frost-laden or damp surfaces
◆ For continuous immersion in water
When stored at or below 27ºC(80ºF)in the original unopened containers, this product has a usable life of 6 months from the date of manufacture.
Check the Material Safety Data Sheet(MSDS) before using the product.
Sealant products are not toxic after fully cured, but should avoid contact with eyes before curing. If contact with eyes, rinse with plenty of water and consult a doctor. uncured products should be kept out of contact with children. The product will release small molecular substances during the curing process, and ventilation should be paid attention to in the construction and curing areas to prevent the concentration of small molecular substances from being too bad for people.
Attention: The data and information presented in this catalog may not be relied upon to represent standard values. We reserves the right to change such data and information. However, because conditions and methods of use of our products are beyond our control, so we cannot ensure the validity and applicability of some usage, before using the product, users should read the technical data carefully, then decide the best way to use sealant.
GUANGZHOU BAIYUN CHEMICAL INDUSTRY CO., LTD. SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
GUANGZHOU BAIYUN CHEMICAL INDUSTRY CO., LTD. DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
