BAIYUN SDM501 Industrial Encapsulant Sealant Led Encapsulant Two Part Potting Sealant Fasten Components
Guangzhou Baiyun Chemical Industry Co., Ltd. was established in 1985, which is the first silicone sealant research and production company in China. During this 36 years history, we always provide excellent silicone sealant solutions and service to our customers.
SDM501 Industrial Encapsulant Sealant
- Recommendatory mixing ratio is 10:1(weight ratio), the mixing ratio is adjustable; good fluidity;
- It can be applied with needle tube, no color change after curing, good adhesion to most materials;
- No change in performance from -40 ° C to 220 ° C;
- Excellent weathering resistance, UV resistance, aging resistance;
- Potting for the product of electronic components, power modules, etc.;
- Sealing for the product of electronics and electrical modules.
Typical Technical Data
|Test Item (after curing performance)
||Black or clear fluid
|Snap Time (min)
|Volume Resistivity (Ω.m)
|Voltage breakdown strength (MV/m)
|Tensile strength (Dumbbell specimen MPa)
|Ultimate elongation (%)
- Provide complete technical data of products;
- According to customer requirements, the formulation of the product is debugged to meet the customer's requirements for certain special properties of the product:
- Provide adhesion test for users, appraise adhesion performance of sealant products for industry of the company and material selected by users, and offer the contents such as in test results, recommended surface washing method of products and whether priming or not in writing to users;
- It is welcome to cooperate with our engineers, communicate and discuss solutions together.
This product is non-toxic after it is fully cured, but should avoid contact with eyes and children before curing; keep the ventilation in the working environment.
Note to users: The information published in this article is all that we believe to be reliable. Due to the wide variety of situations, we cannot understand all the situations, so we cannot guarantee the correctness and applicability of our products in certain usages and uses. Users should understand the product in detail before using the product, and then decide the best way to use it.