SS602T Construction Joint Sealant Neutral Silicone Weatherproofing Sealant

1 Product Features
A. Single component, easy to use, good extrudability and thixotropy at 4-40°C;
B. Neutral curing, no corrosion to metal, coated glass, travertine and other building materials;
C. No pollution to porous materials such as travertine;
D. Used in combination with PR108 primer, it has good adhesion effect to travertine and will not change due to wind, snow and rain.
E. Excellent weathering resistance, aging resistance, UV resistance, ozone resistance, water resistance;
F. Excellent resistance to high and low temperature performance, no brittleness, hardening or cracking at -50°C after curing, no softening, degradation at 150°C, and good elasticity;
H. It has good compatibility with other neutral silicone adhesives.

2 Main Uses
Cave stone curtain wall sealing joint sealing;
Travertine is sealed with other materials such as glass and metal.

3 Use Restrictions
Cannot be used as structural sealant;
Not suitable for copper and polycarbonate materials;
Should not be used in dense and ventilated places, because the sealant needs to absorb the moisture in the air to cure;
When the surface temperature of the material is lower than 4°C or exceeds 40°C, it is not suitable for construction;
Not suitable for frosted or wet surfaces;
Not suitable for continuous water immersion or wet place year-round;
Avoid contact with rubber materials (such as rubber strips, rubber pads, etc.) to prevent yellowing;
Should avoid contact with acidic or alkaline substances (such as external wall cleaning fluid) to avoid discoloration;
It should not be used on all materials that can see grease, plasticizers or solvents, such as the surface of oil-impregnated wood.

4 Other Information

5 Maintenance
Generally, no maintenance is required. If the sealant seam is broken and the damaged part is replaced, only the accumulated dirt can be removed with a solvent, and then filled with the sealant. The Baiyun brand sealant can adhere well to the cured similar sealant.

6 Safety instructions
Before using the product, check the product's safety data sheet (MSDS) data.
The sealant product is completely non-toxic after curing, but contact with the eyes should be avoided before curing. If contact with the eyes, rinse with plenty of water and consult a doctor. Uncured products should be avoided by children. During the curing process, the product will release small molecules. Ventilation should be taken care of in the construction and curing areas to avoid the adverse effects of large concentrations of small molecules on people.