|Place of Origin:||CHINA|
|Minimum Order Quantity:||Cartridge / Sausage Packaging 1000PCS；Drum Packaging 3Kits|
|Payment Terms:||L/C, T/T, D/A|
|Supply Ability:||Cartridge / Sausage Packaging 1000000PCS/month; Drum Packaging 10000 Kits / month|
|Material:||Silicone Sealant||Color:||Part A: White; Part B: Black, Mixed:Black|
|Volume:||189L-19L||Package:||Two Iron Drums, 4kits/pallet, 60kits For 20 Fcl|
Non Structural 2 Part RTV Silicone,
RTV Silicone Insulating Glass Sealant,
Insulating Glass Sealant BAIYUN
BAI YUN® SS616 Insulating Glass Silicone Sealant Non-structural two parts black for secondary seal of IG units
BAI YUN® SS616 Insulating Glass Silicone Sealant
The curing speed can be adjustable, and the deep-seated curing speed is fast, and it is suitable to be used in the factory;
Neutral curing, non-corrosive to metal, coated glass etc.
High modulus and high strength
No unpleasant odor during curing
Excellent resistance to weather, UV, ozone, water;
Remains flexible over a temperature range of -58°F(-50°C) to 302°F(150°C);
Good compatibility with other neutral silicone sealants
RTV silicone sealant
As a secondary edge adhesive sealant in insulating glass units
|Specific Gravity||1.48g/cm³||ASTM D1475|
|Physical Form||Viscous Paste|
|Specific Gravity||1.04g/cm³||ASTM D1475|
|Specific Gravity||1.42g/cm³||ASTM D1475|
|Tooling Time(23°C/73°F, 50% RH)||10-20minutes|
|Snap time(23°C/73°F, 50% RH)||20-70mim|
|Flow, Sag or Slump||＜0.1mm||ASTM C639|
|Mix Ratio(By volume)||A:B = 9-11:1|
|Recommend Mix Ratio(By volume)||A:B=10:1|
|As cured - After 21 days at 23°C (73°F) and 50% RH|
|Durometer Hardness, Shore A||48||ASTM C661|
|Ultimate Tensile Strength||0.9MPa||ASTM C 1135|
|Ultimate Elongation||110%||ASTM C 1135|
|Water Vapor Permeability||15.1g/m2/24h||EN1279|
|Specifications:Typical property data values should not be used as specifications. Assistance with specifications are available by contacting Guangzhou Baiyun Chemical Industry CO., LTD.|
How to use
BAIYUN SS616 Insulating Glass Sealant, when used in non structural applications, must be reviewed by BAIYUN technical service specialists.
Complete design and installation guidelines are contained in the BAIYUN Technical Manual when using this product.
Part A(Base):: White; Part B(Catalyst): Black; After Mixed: Black
Part A(Base): 180 L drum
Part B(Catalyst): 19 L pail
This product should not be used, applied or recommended:
In structural glazing applications.
To building materials that bleed oils, plasticizers or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes
When surface temperatures below 4ºC (39.2ºF) or exceed 40ºC (104ºF)
Where painting of the sealant is required, as the paint film may crack and peel
In below-grade applications
For use as an interior penetration fire stop sealing system
In horizontal floor joints where abrasion and physical abuse are likely to be encountered
To frost-laden or damp surfaces
For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)
For contact with strong acids or bases
To surfaces in contact with food
For continuous immersion in water
For water immersion applications.
Do not apply acid-curing (Acetoxy) silicone sealants to this product as this may cause loss of adhesion of SS616 Insulating Glass Sealant to glass or other substrates used in the system
Handling and safety
Product safety information required for safe use is not included in this document. before handling, read product and material safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available from baiyun sales application engineer, or distributor, or by calling baiyun customer service.
Storage and shelf life:
18 months from the date of manufacture when stored at or below 27ºC (80ºF) in the original unopened containers.
Health and environment information
For information and advice regarding transportation, handling, storage and disposal of chemical products, users should refer to the actual Material Safety Data Sheets containing physical, ecological toxicological and other safety-related data.