In order to protect the safe use of each sealant, ensure that every consumer uses the glue well. Today, BAIYUN will present a unique "sealant protection class" for the storage and use of sealant in special environments, and will protect you with years of experience and professional knowledge!

Since the sealant is a chemical product, the curing mechanism is to react and cure in the presence of moisture, and the outer packaging can only play a limited barrier function when immersed in water. Therefore, all sealants soaked in water should be transported away from the water-immersed environment as soon as possible, and transferred to dry and ventilated indoor conditions, and the outer packaging carton should be removed, dry the surface or dry indoors, and use as soon as possible. .

TIP 1

Plastic bottle-packed product (single component): the plastic bottle has a plastic bottom cover at the bottom, and the bottom cover and the inner wall of the plastic bottle have a certain degree of air permeability. During the soaking process, moisture can easily enter, which may cause different degrees of appearance around the bottom cover. The curing phenomenon will affect the normal use in severe cases. Before use, it is recommended to use a sealant to check the appearance and curing condition. If there is no abnormality, please use it as soon as possible. If there is slight curing at the bottom cover, the tail part can be discarded during the construction process to avoid discarding the whole piece, which can reduce waste. In case of abnormal curing, please do not use.

TIP 2

Products packaged with soft film (single component): For products packaged with soft film, attention should be paid to the position of the metal buckles at both ends and the position where the soft film is attached. These positions may be soaked in water for a long time, and moisture may penetrate into them, resulting in curing phenomenon. . Before use, it is recommended to use a sealant to check the appearance and curing condition. If there is no abnormality, please use it as soon as possible. If the two ends are slightly solidified, you can discard the agglomerates and continue to use. If the bonding position is cured, the appearance of the entire glue is poor, so it is not recommended to use it. In case of abnormal curing, please do not use.

TIP 3

Sealant products in barrels (including one-component and two-component): Before use, it is recommended that users open the barrel for inspection. If no water seeps into the barrel, you can continue to use it. If you find that water seeps into the bucket, do not use it blindly.

Professional, Focused, Attentive.

BAIYUN looks forward to working with you to empower beauty.