Send Message
products

Silane Modified Polyether Caulk BAI YUN SMP551 Baiyun Silicone Sealant

Basic Information
Place of Origin: CHINA
Brand Name: BAI YUN®
Certification: ASTM C920
Model Number: SMP551
Detail Information
Package: 20pcs/box; 60boxes/pallets Color: Black, Gray, White
Volume: 500ml Material: Polyether Sealant
High Light:

SMP Baiyun Silicone Sealant

,

BAI YUN SMP551 Polyether Sealant

,

Polyether Caulk BAI YUN


Product Description

BAI YUN®SMP551 Silane Modified Polyether Sealant 25% low module sealing for precast building

BAI YUN®SMP551 Silane Modified Polyether Sealant

Features:

  • Environmental friendly: low VOC, nonpoisonous, no staining or corrosion to substrate.

  • < >: can be painted with most coatings, outstanding compatibility.

    Excellent workability: single component, good extrusion between 4~40℃, very easy to tool.

  • Outstanding adhesion: bond to most construction materials. Better use primer.

  • Movement Capability:±12.5%, exhibit stable performances during normal shape change from stretch and shearing of joint inside the constructions.

  • Excellent physical properties: Excellent weather resistance, excellent resistance to aging.

     

    Applications:

  • Sealing joints between aluminum frame and concrete;

  • Sealing the gaps for internal or external windows walls.

     

    Typical Properties:

Property Result Test method
Color White, black, grey  
Curing System Moisture cure  
Service Temperature (℃) -40~80  
Tack-free time(min) ≤180 ASTMC679
Curing Rate(mm/24hr) 3  
Specific Gravity(g/cm3) 1.50~1.70 ASTM
Durometer Hardness (Shore A) 25~45 ASTM C661
Tensile Strength(MPa) ≥0.9

ASTM D412

 

Elongation at break (%) ≥350 ASTM D412
Joint Movement Capacity (%) ±12.5 ASTM C719
Shelf Life(month) 9  

 

Product limitation:

The product should not be used, applied or not recommended:

  • In conditions above 80℃.

  • In structural glazing applications.

  • In totally confined spaces as the sealant requires atmospheric moisture for cure.

  • In applications for immersion or always wet conditions.

  • On substrates that can extrude grease, plasticizer or solvent.

  • On substrates made of polypropylene, polyethylene and polytetrafluoroethylene.

     

    Technical services:

    Complete technical data and adhesion/compatibility tests are available from Guangzhou Baiyun Chemical Industry CO., LTD.

    Staining test service is also provided for clients. Clients can send the substrates to us by e-mail(or other ways), then we will carry out the staining test and give the test report.

     

    Storage and shelf life:

    9 months from date of manufacture when stored at or below 27ºC (80ºF) in the original unopened containers.

    Repairs:

    Repairs should not be needed in ordinary situations. If sealant is damaged and needs repairs, please remove damaged parts and clean surfaces with isopropyl alcohol, then seal the damaged region with this product. SMP551 silane modified polyether sealant can firmly bond to cured silane modified polyether sealant.

    Package:

    500 mL sausage

    Color:

    Black, gray and white (standard colors)

    Directions for use:

    Before embarking on any work involving SMP551 silane modified polyether sealant for precast concrete building, the safety data sheet should be carefully studied by those carrying out the work.

  • All surfaces must be structurally sound, clean, dry and free of oil, grease, asphalt, and any loose particles.

  • This product is strongly suggested to use primer PR103 before apply the sealant.

  • Mask adjacent surfaces. Install approved backing material where necessary.

  • Cut the nozzle to the required diameter.Apply sufficient sealant into joint sides to ensure complete contact.

  • Tool in 10 minutes. Remove masking immediately after tooling.

  • Keep good ventilation during construction and cure.

  • To confirm optimum adhesion on either a porous or nonporous surface, adhesion testing should always be carried out prior to the commencement of any project and be carried out at regular intervals during the project.

     

    Cautions:

    Avoid eye contact with uncured sealant, especially children. In case of eye contact, flush eyes with water or obtain medical attention immediately.

     

    Specifications: ASTM C920

    SMP551 Silane Modified Sealant for precast building

Contact Details
Erick Liu

Phone Number : +8613711658676

WhatsApp : +8615920132200