Structural and weatherseal capability
Odorless, non-corrosive cure system
Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes
12-month shelf life, no lot matching of components
East tooling, low VOC formula
Excellent stability through wide temperature range: -58°F(-50°C) to 302°F(150°C)(fully cured)
RTV silicone sealant
Silicone structural glazing in curtain wall
Structural attachment of many panel systems
Protective glazing applications
Panel stiffener applications
||Black, gray, white
|Tack free time(23°C/73°F, 50% RH)
|Flow, Sag or Slump
|As Cured-After 21daysat 23°C/(73°F), and 50% RH
|Durometer Hardness, Shore A
|Ultimate Tensile Strength
||ASTM C 1135
|Tear Strength ,Die B
|As Cured-After 21daysat 23°C/(73°F), and 50% RH followed by 5,000 hours in a QUV weatherometer,ASTM G53
|Tensile Strength,at 100% elogation
|Ultimate Tensile strength,at break
|Specifications:Typical property data values should not be used as specifications. Assistance with specifications are available by contacting Guangzhou Baiyun Chemical Industry CO., LTD.
BAIYUN SS621 Silicone Structural Sealant is a one-component, high strength neutral curing silicone sealant designed and tested for structurally glazed curtain wall applications. The material is supplied as a paste, which cures into an extremely tough elastomeric silicone rubber ensuring a durable, flexible, watertight bondupon exposure to atmospheric moisture.
BAIYUN SS621 Silicone Structural Sealant meets or exceeds the requirements of the following specifications for one-part structural sealants.
·ASTM C1184, Type M, Use G and O
BAIYUN SS621 Silicone Structural Sealantis available in black, gray, white or other colors on request.
BAIYUN SS621 Silicone Structural Sealant is available in 10.1 fl. oz. (300 ml) plastic caulking cartridges and 20 fl. oz. (590 ml) foil sausage packs.
USABLE LIFE AND STORAGE
When stored at or below 27ºC (80ºF) in the original unopened containers, this product has a usable life of 12 months from the date of manufacture.
SS621 Silicone Structural Sealant should not be used, applied or is not recommended:
In structural glazing applications unless Guangzhou Baiyun Chemical Industry CO., LTD. has reviewed shop drawings for applicability and has performed adhesion and compatibility tests on project substrates, spacer materials and all accompanying accessories. Review and testing is done on a project-by-project basis. No blanket approval is given by Guangzhou Baiyun Chemical Industry CO., LTD. for structural glazing applications. Structural glazing industry guidelines (ASTM C1401) suggest that drawings and details are to be reviewed by all parties involved in the manufacture of an SSG system and for each building project.
To building materials that bleed oils, plasticizers or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes
In totally confined spaces as the sealant requires atmospheric moisture for cure
When surface temperatures of Substrate below 10ºC (50ºF) or exceed 40ºC (104ºF)
Where painting of the sealant is required, as the paint film may crack and peel
In below-grade applications
For use as an interior penetration fire stop sealing system
In horizontal floor joints where abrasion and physical abuse are likely to be encountered
To frost-laden or damp surfaces
For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)
For contact with strong acids or bases
To surfaces in contact with food
For continuous immersion in water
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HANDLING AND SAFETY
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM BAIYUN SALES APPLICATION ENGINEER, OR DISTRIBUTOR, OR BY CALLING BAIYUN CUSTOMER SERVICE.
HOW TO USE
Complete design and installation guidelines are contained in the BAIYUN Technical Manual when using this product.
HEALTH AND ENVIRONMENT INFORMATION
For information and advice regarding transportation,handling,storage and disposal of chemical products,users should refer to the actual Material Safety Data Sheets containing physical,ecological toxicological and other safety-related data.
LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to
ensure that Guangzhou Baiyun Chemical Industry CO., LTD.’s products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Guangzhou Baiyun Chemical Industry CO., LTD.’s sole warranty is that the product will meet the Guangzhou Baiyun Chemical Industry CO., LTD. sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.