|Material:||100% RTV Sealant Guaranteed, Non Mineral Oil||Functionus:||Bonding And Sealing Of Various Household Appliances Insulation And Sealing Of Various Heating Elements|
|Package:||300ml Cartridge||Brand Name:||BAIYUN|
|Shelf Life:||9 Months||Color:||Black,White,Grey|
300ml Industrial Silicone Sealant,
Electric Kettle Sealing Caulk,
non corrosive silicone sealant
1. Product Features
2. Main Application
3. Typical Technical Data
|Test Items||Test Results||Test Standards|
|Tack Free Time(min)||8~20||GB/T 13477|
|Tensile Strength(MPa)||≥1.5||GB/T 528|
|Elongation at Break(%)||≥350||GB/T 528|
|Volume Resistivity (Ω.cm)||≥2.0×1015||GB/T 1692|
|Dielectric Strength(KV/mm)||≥18||GB/T 1695|
|Storage Life||Storage life is 9 months (keep in shade and dry at the temperature between -20℃ and +27 ℃)|
4. Methods of Use
(1) The sealant should be applied in an environment with a temperature of 4℃~ 40℃and a relative humidity of 40%~80%.
(2) In order not to affect the bonding effect, all surfaces are recommended for degreasing and decontamination, and to ensure clean and dry. Suitable solvents include isopropanol, acetone or methyl ethyl ketone.
(3) Apply the sealant to the surface that has been pretreated and then quickly cover the other side that needs to be bonded.
(4) When exposed to moisture, the sealant crusts within 10 to 20 minutes at room temperature and 50% relative humidity. Apply a tool to scrape off excess sealant before the surface is crusted.
7. Technical Services
8. Quality Assurance
The company has passed ISO9001/ISO14001/OHSAS18001 management system certification, and strictly produces and controls product quality according to ISO9001 quality system requirements.
9. Matters Need Attention
Check the Material Safety Data Sheet(MSDS) before using the product.
Sealant products are not toxic after they are fully cured, but should avoid contact with eyes before curing. If contact with eyes, rinse with plenty of water and consult a doctor.uncured products should be kept out of contact with children. The product will release small molecular substances during the curing process, and ventilation should be paid attention to in the construction and curing areas to prevent the concentration of small molecular substances from being too bad for people.