A. Excellent unprimed adhesion to a wide range of substrates.
B. Improves safety in SSG designs
C. Meets global standards for structural glazing (American, China, Europe)
D. Odorless, non-corrosive cure system
E. East tooling, low VOC formula
F. Excellent stability through wide temperature range: -58°F(-50°C) to 302°F(150°C)(fully cured)
A. Silicone structural glazing in high-rise curtain wall
B. Structural glazing in big-size glass wall
C. Structural glazing in complex construction curtain wall
D. Structural glazing in situations with the high-security requirement
E. Other silicone structural and protective glazing applications
|Tooling Time(23°C/73°F, 50% RH)
|Tack-free time(23°C/73°F, 50% RH)
|Flow, Sag or Slump
|As cured - After 21 days at 23°C (73°F) and 50% RH
|Durometer Hardness, Shore A
|Ultimate Tensile Strength
||ASTM C 1135
||ASTM C 1135
|Tear Strength,Die B
|Specifications: Typical property data values should not be used as specifications. Assistance with specifications is available by contacting Guangzhou Baiyun Chemical Industry CO., LTD.
B.RTV silicone sealant
BAIYUN SS922 Two Parts Super Performance Silicone Structural Sealant meets or exceeds the requirements of the following specifications for two-part sealants.
ASTM C1184, Type M, Use G and O
European ETAG 002
China GB 16776
HOW TO USE
BAIYUN SS922 Two Parts Super Performance Silicone Structural Sealant, when used in structural applications, MUST be reviewed by BAIYUN technical service specialists.
Complete design and installation guidelines are contained in the BAIYUN Technical Manual when using this product.
BAIYUN SS922 Two Parts Super Performance Silicone Structural Sealant is available in black.
BAIYUN SS922 base and BAIYUN SS922 Curing Agent are available separately:
Base: BAIYUN SS922 Base is available in 52 US gallon drums (containing ~47.6 US gallons (189 L)) with a polyethylene bag liner.
Catalyst: BAIYUN SS922 Curing Agent is available in a 5.3-US gallon pail (containing ~5.0 US gallons (19 L)
BAIYUN SS922 Two Parts Super Performance Silicone Structural Sealant should not be applied:
A. In structural glazing applications unless Guangzhou Baiyun Chemical Industry CO., LTD. has reviewed shop drawings for applicability and has performed adhesion and compatibility tests on project substrates, spacer materials and all accompanying accessories. Review and testing is done on a project-by-project basis. No blanket approval is given by Guangzhou Baiyun Chemical Industry CO., LTD. for structural glazing applications. Structural glazing industry guidelines (ASTM C1401) suggest that drawings and details are to be reviewed by all parties involved in the manufacture of an SSG system and for each building project.
B. To building materials that bleed oils, plasticizers, or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes
C. When surface temperatures below 10ºC (50ºF) or exceed 40ºC (104ºF)
D. Where painting of the sealant is required, as the paint film may crack and peel
E. In below-grade applications
F. For use as an interior penetration fire stop sealing system
G. In horizontal floor joints where abrasion and physical abuse are likely to be encountered
H. To frost-laden or damp surfaces
I. For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)
J. For contact with strong acids or bases
K. To surfaces in contact with food
L. For continuous immersion in water
M. For water immersion applications.
Do not apply acid-curing (Acetoxy) silicone sealants to this product as this may cause loss of adhesion of SS922 Two Parts Silicone Structural Sealant to glass, and/or other substrates used in the system.
HANDLING AND SAFETY
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM BAIYUN SALES APPLICATION ENGINEER, OR DISTRIBUTOR, OR BY CALLING BAIYUN CUSTOMER SERVICE.
USABLE LIFE AND STORAGE
When stored at or below 27ºC (80ºF) in the original unopened containers, BAIYUN SS922 Two Parts Super Performance Silicone Structural Sealant Curing Agent and Base has a usable life of 12 months from the date of manufacture.
HEALTH AND ENVIRONMENT INFORMATION
For information and advice regarding transportation, handling, storage, and disposal of chemical products, users should refer to the actual Material Safety Data Sheets containing physical, ecological toxicological, and other safety-related data.
LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer tests to
ensure that Guangzhou Baiyun Chemical Industry CO., LTD.’s products are safe, effective, and fully satisfactory for the intended end-use. Suggestions of use shall not be taken as inducements to infringe any patent.
Guangzhou Baiyun Chemical Industry CO., LTD.’s sole warranty is that the product will meet the Guangzhou Baiyun Chemical Industry CO., LTD. sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.