BAIYUN® SGH233 High Temperature Thermal Conductive Compound Grease for LED Assemblies
SGH233 thermal conductive grease is a paste-like thermal interface material based on siloxane polymer and thermal conductive fillers. SGH233 can fill micro voids and reduce contact resistance. It is suitable for screen printing, automatic dispensing, brushing and other processes.
- Good thermal conductivity with low oil bleed and low VOC
- Achieves thin bond lines under low pressure
- High stability and reliability
- Solvent free and environmental friendly
- LED assemblies
- Communication equmipment or electronic device
- Power module
- Any interface that requires heat conduction or heat dissipation
||White or Grey
Specifications: Typical property data values should not be used as specifications.
- Thickness and coating uniformity are the key attributes affecting the thermal performance of silicone grease. Appropriate construction methods should be used according to actual needs to obtain thin Bond Lines Thicknesses(BLTs)and uniform grease layer.
- All surfaces should be thoroughly cleaned and/or degreased with solvents such as methyl ethyl ketone (MEK).
- It is suitable for screen printing or automatic dispensing or syringe dispensing.
- Adequate ventilation or air-supplied or self-contained breathing apparatusshould be needed.
SGH233 Thermal Condutive Grease is available in 10.1 fl. oz.(300 ml)plastic cartridges and 1kg plastic tub.
USABLE LIFE AND STORAGE
When stored at or below 27ºC(80ºF)in the original unopened containers, this product has a usable life of 12 months from the date of manufacture.
HANDLING AND SAFETY
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM BAIYUN SALES APPLICATION ENGINEER, OR DISTRIBUTOR, OR BY CALLING BAIYUN CUSTOMER SERVICE.
Baiyun is the one of the first production and sales enterprises for silicone structural sealant which was approved by the State Economic and Trade Commission. Our company was the only one of the industry which was rated as “demonstration base for the industrialization of the new technology of building sealant” by the Ministry of Construction, and Baiyun has been rated as the “International Cooperation Base” as awarded by the Ministry of Science and Technology of the State, and the “one of the first prefabricated building industrial bases of the State” as awarded by the Ministry of Housing and Urban-Rural Development. Moreover, Baiyun is the key high-tech enterprise of the national torch program and is the enterprise with Chinese famous trademark as approved by the Trademark Office under the State Administration of Industry and Commerce.
BAIYUN® SGH233 Thermal Conductive Grease